Applications of Markov spectra for the weighted partition network by the substitution rule

The weighted self-similar network is introduced in an iterative way. In order to understand the topological properties of the self-similar network, we have done a lot of research in this field.Firstly, according to the symmetry feature of the self-similar network, we deduce the recursive relationship of its eigenvalues at two successive generations of the transition-weighted matrix.Then, we obtain eigenvalues of the Laplacian matrix from these two successive generations.Finally, we calculate an accurate expression for the eigentime identity and Kirchhoff index from the spectrum of the Laplacian matrix.     

Eu^3+激活氟氧硼酸锗酸盐闪烁玻璃的发光性能

采用传统高温熔融法合成了玻璃组成为B2O3-GeO2-15GdF3-(40-x)Gd2O3-xEu2O3(0≤x≤10)的Eu^3+激活氟氧硼酸锗酸盐闪烁玻璃。在硼锗酸盐玻璃基质中,Gd2O3和GdF3稀土试剂的总含量高达55%,从而确保其密度高于6.4 g/cm^3。闪烁玻璃的光学性能通过光学透过光谱、光致发光光谱、X射线激发发射(XEL)光谱和荧光衰减曲线来表征。玻璃中Gd^3+→Eu^3+离子的能量传递通过激发光谱、发射光谱和Gd^3+-Eu^3+离子间距得到证明,同时也确定了在紫外线和X射线激发下Eu^3+激活氟氧硼酸锗酸盐闪烁玻璃的最佳浓度。Judd-Ofelt理论分析了玻璃中Eu―O键的共价性随Eu^3+掺杂浓度增加而显著增强。Eu^3+激活氟氧硼酸锗酸盐闪烁玻璃在80~470 K温度范围内荧光衰减曲线和发射光谱的温度依赖关系最终证实了其具有较好的发光稳定性。     

表面喷砂对有机玻璃沿面闪络性能影响

绝缘子表面粗糙处理是提升其沿面闪络性能的重要途径,表面粗糙化处理方式不当,极易带来表面结构不均匀,难以获得稳定耐压性能的绝缘材料。为提升绝缘子表面粗糙处理的均匀性,本文利用表面喷砂技术对圆柱形有机玻璃(PMMA)绝缘子进行了粗糙化处理研究,以球形二氧化硅(SiO2)颗粒为工作介质,研究了不同喷砂粒径、氢氟酸后处理等因素对绝缘材料表面形貌和组分的影响,并利用短脉冲高压测试平台对喷砂处理前后有机玻璃绝缘子样品进行了真空沿面闪络性能测试。研究结果表明,喷砂处理在有机玻璃表面形成了较为均匀的凹坑,HF酸能够有效去除表面残留的SiO2颗粒,具有表面喷砂粗糙结构的绝缘子沿面闪络电压得到了稳定提升,相较于未处理的绝缘子闪络电压提升了约80%。     

衬底温度对Ga液滴在Al_(0.4)Ga_(0.6)As表面形成纳米结构的影响

本文研究了不同衬底温度对Ga液滴在Al_(0.4)Ga_(0.6)As表面形成纳米结构的影响,当300℃≤T≤380℃时,Ga液滴演化成纳米孔(Nanohole)和盘状结构(diffusion halo),纳米结构的尺寸随温度升高而增大.当T≥385℃时,盘状结构消失,形成一定平坦的Al_xGa_(1-x)As薄膜,Ga液滴在界面处继续向下刻蚀直至耗尽,形成平均直径为75 nm,平均孔深为5.52 nm的纳米孔.本文还通过盘状结构测出平均扩散长度△R,并拟合出Ga原子在Al_(0.4)Ga_(0.6)As表面的激活能E_A=0.78(±0.01) eV和扩散前因子D_0=0.15(×4.1~(±1))10~(-2 ) cm~2s~(-1).     

Rational design of perfluorinated sulfonic acid ionic sieve modified separator for high-performance Li-S battery

Journal of Solid State Electrochemistry - Practical application of Li-S battery is limited by the fast capacity decay and low coulombic efficiency caused by the shuttling phenomenon. Modification...     

A modified SPH method to model the coalescence of colliding non-Newtonian liquid droplets

This paper develops a modified smoothed particle hydrodynamics (SPH) method to model the coalescence of colliding non-Newtonian liquid droplets. In the present SPH, a van der Waals (vdW) equation of state is particularly used to represent the gas-to-liquid phase transition similar to that of a real fluid. To remove the unphysical behavior of the particle clustering, also known as tensile instability, an optimized particle shifting technique is implemented in the simulations. To validate the numerical method, the formation of a Newtonian vdW droplet is first tested, and it clearly demonstrates that the tensile instability can be effectively removed. The method is then extended to simulate the head-on binary collision of vdW liquid droplets. Both Newtonian and non-Newtonian fluid flows are considered. The effect of Reynolds number on the coalescence process of droplets is analyzed. It is observed that the time up to the completion of the first oscillation period does not always increase as the Reynolds number increases. Results for the off-center binary collision of non-Newtonian vdW liquid droplets are lastly presented. All the results enrich the simulations of the droplet dynamics and deepen understandings of flow physics. Also, the present SPH is able to model the coalescence of colliding non-Newtonian liquid droplets without tensile instability.     

Reverse Thinking of the Aggregation-Induced Emission Principle: Amplifying Molecular Motions to Boost Photothermal Efficiency of Nanofibers**

Using reverse thinking of the aggregation-induced emission (AIE) principle, we demonstrate an ingenious and universal protocol for amplifying molecular motions to boost photothermal efficiency of fibers. Core–shell nanofibers having the olive oil solution of AIE-active molecules as the core surrounded by PVDF-HFP shell were constructed by coaxial electrospinning. The molecularly dissolved state of AIE-active molecules allows them to freely rotate and/or vibrate in nanofibers upon photoexcitation and thus significantly elevates the proportion of non-radiative energy dissipation, affording impressive heat-generating efficiency. Photothermal evaluation shows that the core–shell nanofibers with excellent durability can reach up to 22.36 % of photothermal conversion efficiency, which is 26-fold as the non-core–shell counterpart. Such a core–shell fiber can be used for photothermal textiles and solar steam generation induced by natural sunlight with green and carbon-zero emission.     

Suppressing Strong Exciton–Phonon Coupling in Blue Perovskite Nanoplatelet Solids by Binary Systems

Quasi-two-dimensional (2D) perovskites are promising candidates for light generation owing to their high radiative rates. However, strong exciton–phonon interactions caused by mechanical softening of the surface act as a bottleneck in improving their suitability for a wide range of lighting and display applications. Moreover, it is not easily available to tune the phonon interactions in bulk films. Here, we adopt bottom-up fabricated blue emissive perovskite nanoplatelets (NPLs) as model systems to elucidate and as well as tune the phonon interactions via engineering of binary NPL solids. By optimizing component domains, the phonon coupling strength can be reduced by a factor of 2 driven by the delocalization of 2D excitons in out-of-plane orientations. It shows the picosecond energy transfer originated from the Förster resonance energy transfer (FRET) efficiently competes with the exciton–phonon interactions in the binary system.